Slatted ceiling panels
fromUS$ 79
Slatted ceiling panels
Tongue-and-groove plywood slats that follow the curve of the roof, with cutouts for lights and ventilation.
Exact fit for 2 vans · adaptable to 1see which
Price of the file; your country's tax is added at checkout
Pay with an international card (Visa, Mastercard, Amex…); the payment is processed by Paddle.
- DXF and SVG cutting files
- STEP 3D model
- PDF assembly manual
- Bill of materials
- Technical datasheet
This is a digital product: the result depends on the cutting and assembly done by you or your shop. License
Verified on a real van
Drawn on a Mercedes-Benz Sprinter 906 L2 high roof, cut in plywood and test-fitted in the van before publishing. Verified August 2026.
What it's like
Covers the entire ceiling of the cargo area with 90 mm slats that attach to the factory crossmembers without drilling through the body panel. The design includes holes for two LED spots on every other slat and the cutout for a 400 × 400 mm roof hatch. The slats butt together with a V-groove that hides variations of up to 2 mm.
Specifications
| Outer dimensions | 1,700 × 3,200 mm |
|---|---|
| Sheet thickness | 9 mm or 12 mm |
| Sheets needed | 3 × 2440 × 1220 mm |
| Recommended material | Guatambú plywood 9 mm |
| Router bit | Straight 6 mm · 2 flutes |
| Assembly time | 6 hours |
| Exact fit for | Sprinter 906 |
| Adaptable to | Sprinter 907 |
Files in the pack
- DXF cutting file (one layer per operation)dxf
- SVG cutting filesvg
- STEP 3D modelstep
- PDF assembly manualpdf
- Bill of materials and hardwarepdf
- Technical datasheetpdf
Questions about this design
Does it work on a low roof?
No. The curve of the slats is calculated for the high roof of the 906. We are working on a low-roof version.
How is it attached?
With hidden clips cut from the same pack and self-drilling screws into the factory crossmembers. There is no need to drill the outer body panel.
Goes with
