Rear door panels with shelf
fromUS$ 69
Rear door panels with shelf
Panels for both rear doors with a press-fit shelf and tool pockets.
Exact fit for 3 vanssee which
Price of the file; your country's tax is added at checkout
Pay with an international card (Visa, Mastercard, Amex…); the payment is processed by Paddle.
- DXF and SVG cutting files
- STEP 3D model
- PDF assembly manual
- Bill of materials
- Technical datasheet
This is a digital product: the result depends on the cutting and assembly done by you or your shop. License
Verified on a real van
Drawn on a Mercedes-Benz Sprinter 906 L2 high roof, cut in plywood and test-fitted in the van before publishing. Verified September 2026.
What it's like
Replaces the factory plastic trim on the rear doors with two plywood panels featuring a 120 mm deep shelf and three slotted pockets. Everything is press-fit: the shelf locks into the slots of the panel with no hardware. It leaves the original handles, locks and lights untouched.
Specifications
| Outer dimensions | 760 × 1,600 × 120 mm |
|---|---|
| Sheet thickness | 12 mm |
| Sheets needed | 2 × 2440 × 1220 mm |
| Recommended material | Guatambú plywood 12 mm |
| Router bit | Straight 6 mm · 2 flutes |
| Assembly time | 3 hours |
| Exact fit for | Sprinter 906 |
| Adaptable to | — |
Files in the pack
- DXF cutting file (one layer per operation)dxf
- SVG cutting filesvg
- STEP 3D modelstep
- PDF assembly manualpdf
- Bill of materials and hardwarepdf
- Technical datasheetpdf
Questions about this design
Do the doors close properly with the shelf?
Yes. The shelf stays within the volume of the original trim; we tested it with both doors closed and the rubber seal intact.
Goes with
